NEC Univerge SV9300 Series - Keys and Parts

EAP-TLS, and VPN (L2TP/IPsec (IPv4)) are supported for terminal
firmware 3.0.0.0 or later. For detail of terminal firmware version, please
contact the system administrator.
VPN (L2TP/IP sec (IPv4)) is not supported for ITY-8LDX-1P TEL for
China/ITY-32LDG-1P TEL for China/ITY-6D-1P TEL for China/
ITY-6DG-1P TEL for China.
The maximum number of directory entries registered per terminal is set
by means of system data setting. For details, please contact the system
administrator.
When a PoE (Power over Ethernet) HUB supports NEC Proprietary
Protocol is used for central power supply, ILPA-R UNIT, which is an
adapter for converting IEEE802.3af to NEC Proprietary Protocol is
needed. When iILPA-R UNIT is used, 1000BASE-T is not available.
For details, please contact the system administrator.
For details of terminal firmware version, please contact the system
administrator.
The VLAN function by DHCP and File Download by HTTPS are supported
for terminal firmware 3.1.0.0 or later
.
For details of terminal firmware version, please contact the system
administrator.
KEYS AND PARTS
This section explains keys and parts of terminal.
(1)
(3)
(2)
(4) (5) (6) (7) (8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(1)
(3)
(2)
(4) (5) (6) (7) (8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(14)
NO. NAME FUNCTION
(1) Handset Used for sending/receiving voice.
(2)
Exit key
To exit the Menu or Help
mode and go back to the time display.
INTRODUCTION
3