NEC Univerge SV9300 Series - Trunk Queuing - Outgoing

When a phone number has been already
registered in One-touch key, that number is
displayed on the LCD. The previous number
will be cleared when you register a new
number.
TO VERIFY
Following explains how to confirm the registered
number in the One-touch Speed Calling key
.
1. Press Feature key.
Feature key lamp lights red. →
2. Press a desired One-touch Speed
Calling key
.
Feature key lamp flashes red. →
Speaker key lamp lights red. →
00:81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
3. Press Speaker key
.
Feature key lamp goes off. →
Speaker key lamp goes off. →
TO MAKE A CALL
Following explains how to make a call with One-
touch Speed Calling key
.
1. Press One-touch Speed Calling key.
Speaker key lamp lights red. →
The desired number is automatically dialed.
81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
2. When party has answered, lift the
handset.
Speaker key lamp goes of
f. →
0:00:05 81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
MIC Mute
STATION SPEED DIALING
This
feature allows a terminal user to dial long-digit
or frequently-called numbers by pressing feature
key and abbreviated code.
TO REGISTER FOR STATION
SPEED DIALING
1. Press Feature key
.
Feature key lamp lights red. →
2. Press (Redial).
Y
ou will receive a special dial tone.
Feature key lamp flashes red. →
Speaker key lamp lights red. →
SPEED
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
3. Dial desired abbreviated code.
Example : “09” is entered.
09:
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
4. Press that is access code.
Y
ou will receive a confirmation tone.
9
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
5. Dial the desired number
.
81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
6. Press Feature key
.
Feature key lamp goes off. →
Speaker key lamp goes off. →
FEATURE OPERATION
62