NEC Univerge SV9300 Series - LCD Backlight Control

6. Select “ Screen Saver Mode”.
Select one of the following operations.
• Highlight an item by using , and press
, or Soft key (OK).
•
Press
.
1
Screen Saver Mode
2
Wait Time
↓ Back OK
7. Select whether to launch up the
Screen Saver
.
Select one of the following operations.
• Highlight an item by using
, and press
or Soft key (OK).
•
Press
or , and press or Soft
key (OK).
1
Disable
2
Enable
↓ Back OK
The display goes back to the [Screen Saver]
screen.
8. Select “ Wait Time”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
1
Screen Saver Mode
2
Wait Time
↑ ↓ Back OK
9. Enter the W
ait Time.
After entering the Wait Time by digit key,
press
or Soft key (OK).
Input wait time.
120
BK Back OK
The display goes back to the [Screen Saver]
screen.
TO ENABLE/DISABLE LCD
BACK LIGHT
Following explains how to turn On/Of
f of the LCD
Back light.
1. Press
Menu
key to display the
Menu Screen.
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ User Setting”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
1
User Setting
2
Download
↓ Back OK
4. Select “ Display”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
3
Display
4
Change Password
↑ ↓ Back OK
5. Select “ Back Light”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
3
Screen Saver
4
Back Light
↑ ↓ Back OK
TERMINAL SETUP
35