Tone Type 1 to Tone Type 8:
In the preview function, each ringer tone
sounds continuously. However when “
Automatic” is selected, each ringer pattern of
internal and external incoming calls is
determined
by the initial system settings. For
details, please contact the system
administrator.
When selecting “ Automatic”,
the preview
function will not operate. Setting by Feature
key and
become effective.
The "Music Ring 1/2/3" have been
downloaded at factory to terminal firmware
3.1.0.0 or later
. When you use ring tone
music source other than "Music Ring 1/2/3",
please download other music file.
For the procedure of downloading a ringer
tone file, please refer to “TO DOWNLOAD A
FILE” on page 41.
A ringtone file can't be downloaded by
ITY-6D/6DG.
TO ENABLE/DISABLE RTP
ALARM
Following explains how to enable/disable R
TP
Alarm. The RTP Alarm tone allows the terminal
user to be notified that the voice packet is not
received in a certain period of time because of the
network delay etc.
1. Press
key to display the
Menu Screen.
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ User Setting”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
1
User Setting
2
Download
↓ Back OK
4. Select “ Talk”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
1
Incoming Call
2
Talk
↑ ↓ Back OK
5. Select “ RTP Alarm”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
• Press .
1
RTP Alarm
2
DTMF Tone
↓ Back OK
TERMINAL SETUP
30
To Next Page
Loading...
