4. Press Answer key again.
Return
to the original party and another party
is placed on hold. (It is possible to change the
connection as many times.)
EXECUTIVE OVERRIDE
This feature allows selected users to override a
busy condition on a called terminal.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator
.
(1) Call in progress.
(2) Override.
The terminal “b” is talking with the terminal “c”, and
the terminal “a” is going to override the connection.
1. T
erminal “a” dials 201. (The called
party is a call in progress.)
You will receive a busy tone.
BUSY 201
4:26 PM MON 11 MAY 2015
CB CW >>>>
2. Press Executive Override feature
key
. →
You will receive a warning tone.
•
Talking three parties.
OVER RIDE 210 201
4:26 PM MON 11 MAY 2015
MIC Mute
FEATURE OPERATION
75
To Next Page
Loading...
