• CALL IS ON HOLD
HOLD 201
4:26 PM MON 11 MAY 2015
SOFT KEY FEATURES
The following table describes features supported by Soft key. Also, service description is displayed on the screen
by key.
DISPLAY FEATURE DESCRIPTION
MIC Microphone On/Off To turn the microphone on and off for handsfree calling.
DIR Dial By Name To search for a desired number in system directory by name.
HIST. Call History To display outgoing and incoming call history. By using Call History data, it is
possible to make a call or register to the system directory
.
PICK Call Pickup - Group To answer the call directed to another station within Call Pickup - Group.
FDA Call Forwarding -
All Calls
Regardless of the busy or idle status, the incoming call is forwarded to the other
terminal.
FDN Call Forwarding -
No Answer/Busy
The incoming call is forwarded to the other terminal when the terminal is busy
or no answer for predetermined time.
DND Do Not Disturb To restrict incoming calls to the terminal. It is possible to make a call during Do
Not Disturb is set.
CB Call Back To set automatic Call Back when a busy or no answer condition is encountered.
When the called terminal becomes available, the terminal that set the Call Back
is called.
CW Call Waiting - Set When the caller encounters busy, the caller can request to answer the call with
burst tone. The called party can answer the call by placing the original call on
hold.
VOICE Voice Call To alert incoming call by caller's own voice instead of ring tone.
CONF Conference -
Three/Four Party
During two parties connection, to add another party to make a conference call.
Recall Recall To finish a call and hear the dial tone to make an another call.
INTRODUCTION
17
To Next Page
Loading...
