TO MAKE A CALL USING
STATION SPEED DIALING
1. Press
(Redial).
Speaker key lamp lights red. →
11 MAY 4:26 JOHN SMITH
81XXXXXXXXXX
<<<< Redial ↑P
rev ↓Next
2. Dial abbreviated code.
Example : “09” is entered.
09
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
3. The phone number is automatically
dialed.
81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
4. Lift the handset.
Speaker key lamp goes of
f. →
0:00:05 81XXXXXXXXXX
4:26 PM MON 11 MAY 2015
MIC Mute
ORIGINATING A VOICE
CALL
Instead of ringing, this feature informs the
incoming call by voice.
This feature is set by Soft key or feature key.
The
feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. Press Speaker key
.
You will receive a dial tone.
Speaker key lamp lights red. →
Line key lamp lights green. →
200
4:26 PM MON 11 MAY 2015
Recall PICK >>>>
2. Dial extension number
.
You will receive a ring back tone.
201
4:26 PM MON 11 MAY 2015
Recall VOICE CB >>>>
3. Press
Soft key (VOICE) or Voice Call
feature key.
VOICE CALL 201
4:26 PM MON 11 MAY 2015
Recall VOICE CB >>>>
4. Lift the handset and announce an
incoming call by voice to called
party
.
Speaker key lamp goes off. →
5. Start conversation after called party
answered.
201
4:26 PM MON 11 MAY 2015
MIC Mute
"VOICE" is displayed on the LCD of called
party
.
FEATURE OPERATION
63
To Next Page
Loading...
