NEC Univerge SV9300 Series - Setting Ringer Tone

TO SET RINGER TONE
This section explains how to set a ringer tone.
WHEN DISTINCTIVE RINGING
PATTERNS TO DISTINGUISH
INTERNAL AND EXTERNAL
INCOMING CALLS IS
PROVIDED
Leave the setting of “Ring Tone” to “ Automatic”
(default setting).
Use each default ringer tone for both external
and internal incoming calls. Ringing pattern
is programmable on a system basis. For
details, please contact the system
administrator
.
WHEN DISTINCTIVE RINGING
PATTERNS TO DISTINGUISH
INTERNAL AND EXTERNAL
INCOMING CALLS IS NOT
PROVIDED
You can set ringer tone from “Setting”. The
following explains how to set.
1. Press
Menu
key to display the
Menu Screen.
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ User Setting”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
1
User Setting
2
Download
↓ Back OK
4. Select “ Incoming Call”.
Select one of the following operations.
• Highlight an item by using , and press
, or Soft key (OK).
•
Press
.
1
Incoming Call
2
Talk
↓ Back OK
5. Select “ Ring Tone”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
3
Ring Tone
↑ Back OK
6. Select “ Internal Call”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
Do not select “ External Call”.
Ringing Tone which has been selected in “
Internal Call” will be applied to both external
and internal incoming calls.
1
External Call
2
Internal Call
↑ Back OK
TERMINAL SETUP
28