NO. NAME FUNCTION
(3) Speaker Originating a call with handsfree.
(4) Dial keypad Dial the called party number or feature access code.
(5) Hold key To place a call on hold.
(6) Transfer key Allows the terminal user to transfer established calls to another termi-
nal, without attendant assistance.
(7) Speaker key (with light) To control the built-in speaker which can be used for handsfree dialing
or monitoring.
(8)
Cursor key
This key is used as cursor-movement key (Up/Down/Right/Left Key) on
the Menu screen.
And determine the selected item in the Menu screen (Center Key).
Also, this key is used for the following operations.
V
olume (UP/DOWN) key
Used to adjust speaker/receiver volume, and ringer volume.
Right key (Directory)
Press this key to open the Directory menu.
Left key (Redial)
Press this key to activate Redial feature. Press Redial and scroll
back through numbers that have been dialed. When the desired
number is displayed, press
or to activate dialing.
(9)
key
To access the menu of terminal.
(10) Mic key (with light) To respond handsfree. LED lights during speakerphone operation.
(11) Answer key (with light) When LED on this key is lit, press this key to answer the incoming call.
(12) Feature key (with light) To activate features such as terminal setup and to program One-Touch
Speed Calling keys.
(13) Recall key To finish a call and hear the dial tone to make an another call.
(14) Programmable keys (with
light)
These keys can be programmed as Flexible line key/Programmable
feature key by system administrator
.
(15)
Soft keys The feature name is shown at the bottom of the LCD. The appropriate
feature key is displayed on the screen according to the call handling
process.
(16)
Help key
To call up explanations of the Soft keys on the LCD.
(17) LCD To display date or dialed number etc.
(18) Call Indicator Lamp The lamp at the top corner of display flashes when a call terminates to
the terminal.
(19) Scroll key To switch the page number of screen showing programmable key.
For
ITY-8LDX terminal, this key can not be used since it supports up to
8 keys.
INTRODUCTION
4
To Next Page
Loading...
