NEC Univerge SV9300 Series - Making a Call; Answering a Call

17. Select “ Data Backup”.
Select one of the following operations.
• Highlight an item by using , and press
, or Soft key (OK).
•
Press
.
1
Data Backup
2
Data Restore
↓ Back OK
18. Enter the file name by digit keys.
The default file name is displayed.
Input a file name. A
PersonalData.tgz
BK Enc Cancel Exec
• Press Soft key (BK) once to delete the
default file name.
•
Enter the file name that is Backup.
Please refer to “APPENDIX B INPUT
CHARACTERS” on page
102 for how to
enter the character.
Up to 20 characters can be entered as a file
name.
When you send to the server the date from a
terminal,it is possible to select the file format
with encryption.
Press Soft Key (Enc) to send the file with
encryption.
Input a file name. A
PersonalData.tgz
BK Enc Cancel Exec
Press Soft Key (No Enc) to send the file
without encryption.
Input a file name. A
PersonalData.tgz.ef
BK NoEnc Cancel Exec
Do not change the extension of backup file.
The setting data of the terminal can only be
backed up as a (.tgz) / (.tag.ef) file.
19. Press Soft key (Exec).
A Backup is started.
Uploading…
A backup is completed.
Upload Complete!
Exit
20. Press Soft key (Exit).
The display goes back to the [Backup/
Restore] screen.
When the backup process ends in failure,
“Upload Failed!” is displayed on the LCD.
Check to see the following points and retry
backup.
CHECK POINTS ACTIONS
Check whether IP address/
address
(URI) of FTP/TFTP/
HTTPS server is correct or
not.
Set the proper IP
address/address
(URI) of FTP/
TFTP/HTTPS
server.
Check whether the power to
FTP/TFTP/HTTPS server
and network equipment are
ON or not.
Turn on the power.
Check whether the LAN ca-
ble is connected securely.
Reconnect the ca-
ble securely.
If the retry of uploading fails many times, the
terminal
may be in failure. For details, please
contact the system administrator.
Other than above conditions, if "Download
Failed!" or "Upload Failed!" is displayed,
please contact the system administrator
.
TO RESTORE THE SETTING
DATA OF TERMINAL
1. Press
Menu
key to display the
Menu Screen.
TERMINAL SETUP
48