NEC Univerge SV9300 Series - Transferring a Call

16. Enter the IP address of FTP/TFTP/
HTTPS server with digit keys.
Use for separator of IP address.
‘*‘For‘.‘
0. 0. 0. 0
BK IP/URI Back OK
• After entering an IP address, press
or Soft key (OK).
The display goes back to the [Backup/
Restore] screen.
T
o enter the address (URI) of FTP/TFTP/
HTTPS, press Soft key (IP/URI) to switch the
display to the URI input screen.
• Press Soft Key (IP/URI)
• By using the Dial keys, enter the address
(URI) of the server where the files are
stored.
‘*‘For‘.‘ A
BK IP/URI Back OK
Please refer to “APPENDIX B INPUT
CHARACTERS” on page
102 for how to
enter the character.
• After
entering addres (URI), press
or
Soft key (OK).
The display goes back to the [Backup/
Restore] screen.
The IP address input screen can be switched
to
URI input screen by the Soft key (IP/URI).
‘*‘For‘.‘
0. 0. 0. 0
BK IP/URI Back OK
• Press Soft Key (IP/URI)
‘*‘For‘.‘ A
BK IP/URI Back OK
• Press Soft Key (IP/URI) again to go
back to the IP address input screen.
17. Select “ Data Restore”.
Select one of the following operations.
• Highlight an item by using , and press
, or Soft key (OK).
•
Press
.
1
Data Backup
2
Data Restore
↑ ↓ Back OK
TERMINAL SETUP
51