Netafim NMC-64 User Manual

User & Installation Manual Introduction
Hot Screen 1
Hot screen 1 displays a summary of active processes, irrigation programs, important
messages, and the time and date.
• NEXT IRRIGATION – Displays next irrigation data:
• CYCLE – Displays how many cycles are set, which cycle is currently active
and how many are remaining.
• WATER – Displays the set water quantity/time, actual/given water
quantity/time and left water quantity/time.
• FLOW - Displays the set/nominal flow rate and actual/measured flow rate.
• EC – Displays the set/required EC and the actual/measured EC values.
• PH - Displays the set/required PH and the actual/measured PH values.
• STATUS – Displays current time & date, active or next program and valve (if more
than three valves are active will show the first three with a + mark next to the last
one to indicate that thee are more valves operative).
• MESSAGES – Displays active alarms.
• ACTIVE – Displays active processes.
Hot Screen 2 - Irrigation Process
Hot Screen 2 displays active irrigation status and is relevant only during irrigation.
The upper section shows active program, valve and start time.
11

Netafim NMC-64 Specifications

General

Brand	Netafim
Model	NMC-64
Category	Controller
Language	English