NMC-64 Irrigation
7. CONFIGURATION
CONFIGURATION
1. DEVICE DELAY CONFIGURATION
2. PUMP CONFIGURATION
3. VALVE CONFIGURATION
4. VALVE FLOW RATE
5. WATER METER
6. DOSING CHANNEL CONFIGURATION
7. DOSING CONFIGURATION
8. EC/pH SENSOR RANGE
9. COOLING CONFIGURATION
10. MISTING CONFIGURATION
7.1 DEVICE DELAY CONFIGURATION
Device Delay Configuration screen enables to define startup and shutdown order the
irrigation process.
DEVICE DELAY CONFIGURATION
On Off
mm:ss mm:ss
Pump
Main Valve
Valve
--:-- 01:00
00:45 00:15
01:00 --:--
Example – according to the settings above the pump will be turned on first, after 45
seconds the main valve and 15 seconds later (1 minute from procedure start) the
valve.
It is recommended that the device that should be started (stopped) first be
defined as zero (will appear as --:--).
58
To Next Page
Loading...
