Netafim NMC-64 User Manual

User & Installation Maunal Software
6.3 TEMPERATURE CALIBRATION
Temperature sensor’s Calibration.
Use the arrow keys to increase/decrease the factor in order to adjust the values.
TEMPERATURE CALIBRATION
Sensor Temp Factor
1
2
3
4
5
6
7
8
29.82 0.00
28.34 0.00
N/A 0.00
N/A 0.00
N/A 0.00
N/A 0.00
N/A 0.00
N/A 0.00
6.4 HUMIDITY CALIBRATION
Same calibration shown for temperature applies to Humidity sensors.
6.5 EC/pH CALIBRATION
EC/pH calibration enables to adjust between the EC/pH transmitters to the NMC-64.
EC pH CALIBRATION
Sensor value Factor
EC
pH
1.46 -0.06
7.21 0.18
Use the arrow keys to increase/decrease the factor until the values shown in the
NMC-64 are equal to the values indicated in the transmitter’s screens.
55

Netafim NMC-64 Specifications

General

Brand	Netafim
Model	NMC-64
Category	Controller
Language	English