Netafim NMC-64 User Manual

NMC-64 Irrigation
Introduction
The Netafim NMC-64 process controller manages irrigation, fertigation, misting, and
cooling systems. This manual describes the programming and operating procedures.
Prior to using the controller in your facility, you will need to complete its installation,
please see
Getting started for further instructions.
Once the controller is configured all relevant menus will be available for use.
General Description
• The Netafim NMC-64 is a top of the line irrigation controller made of the latest and
most updated technology.
• The NMC-64 is a modular flexible controller with many customizable features:
 Output Card Options for 24VAC, Dry Contact.
 Input Cards for analog and digital sensors.
 Sensors for EC, pH, Temperature, Humidity, wind speed & direction etc.
 Local or Remote Communication to PC.
• The new and advanced large LCD graphic screen (40x16 lines) makes the NMC-
64 user friendly and easy to operate and program.
• The NMC-64 is modular and can be expanded by adding additional I/O cards.
Main Features
• Large graphics - LCD 16x40 characters
• 15 irrigation programs
• 60 floating runtime programs
• Flow control (high and low flow, uncontrolled water flow)
• Up to 8 dosing channels, optionally with dosing meters
• Fertigation by quantity, time, ratio (L/M3) and EC/pH
• Filter flushing: up to 24 filters
• Cooling / Humidification program
• Misting program
• History of water & fertigation quantities
• Fault and event list registration
• PC communication and HMI
6

Netafim NMC-64 Specifications

General

Brand	Netafim
Model	NMC-64
Category	Controller
Language	English