Netafim NMC-64 User Manual

User & Installation Maunal Software
7.5 WATER METER
WATER METER
Description Ratio
Water Meter 1 (M3/Pulse)
Water Meter 2 (M3/Pulse)
Water Meter 3 (M3/Pulse)
water collect 1 (M3/Pulse)
water collect 2 (M3/Pulse)
water collect 3 (M3/Pulse)
0.00
0.00
0.00
0.00
0.00
0.00
Set this ratio according to the ratio on the water meter so that the NMC-64 will know
how much water runs through the water meter or is collected in a pulse.
7.6 DOSING CHANNEL CONFIGURATION
FERTILIZER SETTING
No. Pump Method Ratio React High (%) Low (%)
1
2
3
Venturi Time 16.6 EC 30 30
Venturi Time 16.6 EC 30 30
Venturi Time 6.2 PH 30 30
• Pump - Select the type of dosing pump:
• Venturi –
• Hydraulic –
• Electric –
 When working with hydraulic pump, the method can only be
Liter/Pulse
 When working with hydraulic pump EC/pH control is not possible.
• Method - Select the operating method:
• Liter/Pulse – define whether the dosing channel is connected to a dosing
meter and therefore dosing flow rate should be volume per pulse of the
dosing meter in liter (gallons) per pulse.
61

Netafim NMC-64 Specifications

General

Brand	Netafim
Model	NMC-64
Category	Controller
Language	English