NMC-64 Irrigation
In order to manually stop an uncompleted irrigation you must go to table 2.3
START/STOP VALVE because the activation is according to single valves.
4.3 UNCOMPLETED PROGRAMS
The Uncompleted Programs table provides information of programs that could not be
completed. It is important to understand the difference between this table and the
Uncompleted Irrigations table; this table consists only of irrigation cycles that haven’t
been started and could not be completed during current day. This can happen due to
wrong setup of the system (more tasks than could be completed) or because the
system was not active for a long period of time, for example due to power failure, and
could not complete its tasks.
UNCOMPLETED PROGRAMS
No.
Date Time Prog Start Prog Left
hh:mm No. Time Cyc. Cyc.
1
2
3
27-Dec-04 10:03 1 15:51 5 2
28-Dec-03 15:04 93 22:00 2 1
28-Dec-03 15:05 92 23:00 2 2
Uncompleted program table consists of 200 lines.
4.4 DAILY IRRIGATION
Enables to view history of irrigation quantities or time per valve.
DAILY IRRIGATION
How Many Days Ago? 1 Day Ago
Press ENTER to open the list of choice, move with the arrow keys to the relevant day
and confirm your choice by pressing the ENTER button.
For Example 1 day ago means you would like to view Yesterdays history and Today
means you would like to view accumulated history since last End Day.
42