NMC-64 Irrigation
Table
#
Table description
NMC64
Test
5.1 Relays Verify the functionality of each output/device.
Program
1.2 Water Run Time Define water programs; method (quantity/time), total water
quantity/time, water before and water after.
Notice: water before/after are deducted from total water
quantity/time.
1.3 Dosing Define fertilizer programs; method (proportional quantity/time,
total quantity/time), quantities/time per channel and EC/pH set
points.
1.1 Irrigation Define irrigation program; start times, number of cycles, time
between cycles, participant valves, run-time programs, fertilizer
program, etc’.
Manual start
2.3 Manual Start Valve Manually start each valve and verify that the set nominal flow
rate is similar to the measured one.
2.2 Manual Start Program Manually start the programs to check whether they are operative
as set/expected. The program can manually be shut down
after proper operation has been verified.
1. Program
When in the Main Menu screen simply place the cursor on the program icon and press
Enter or directly press numeric key number indicated next to the relevant program.
PROGRAM
1. IRRIGATION
2. WATER RUN TIME
3. FERTILIZER PROGRAM
4. FILTER FLUSHING
5. WATER HEATING
6. COOLING
7. MISTING
8. AGITATOR
9. SELECTOR
18
To Next Page
Loading...
Need help?
General
