NMC-64 Irrigation
ALARM LIST
# Alarm Group
1 Temp Sns# Shorted (1 to 8)
2 Temp Sns# Opened (1 to 8)
3 Temp Sensor # Fail (1 to 8)
4 Out Temp Sen. Shorted
5 Out Temp Sen. Opened
6 Out Temp Sen. Fail
7 Relay Card # Fail (1 to 8)
8 Analog In # Fail (1 to 2)
9 Digital In # Fail (1 to 2)
10 Clock Failure
11 CPU Card Failure
12 Memory Failure
Hardware related alarms. The alarm message will appear
on the main screen and will be registered in the history
table. These alarms will not stop irrigation.
13 EC Sensor Fail
14 pH Sensor Fail
Alarms related to systems that operate with EC/pH control.
If these alarms turn on the controller will switch to
proportional irrigation with no EC/pH control.
15 High Flow
16 Low Flow
17 Water Leak (1 to 3)
18 Dosing channel # leak (1 to 8)
19 Dosing chan. # Fault (1 to 8)
20 External Pause
21 Delta Pressure
22 EC High
23 EC Low
24 pH High
25 pH Low
26 No Flow
27 Flow alarm
28 Short Circuit
User defined alarms (tables
3.3 ALARM DEFINITION, 3.4
ALARM SETTING).
80