NMC-64 Irrigation
• SYSTEM SETUP
• Language – Choose controller language.
• Temperature Unit - Celsius or Fahrenheit.
• Volume Unit - Metric (Liter) or Imperial (Gallon).
• Maximum Cooling Parallel – Define the maximum number of cooling valves
to be operated simultaneously. The maximum number is 20.
• Maximum Misting Parallel – Define the maximum number of misting valves
to be operated simultaneously. The maximum number is 20.
• STOP IRRIGATION
• During Filter Flushing – Define whether irrigation should be stopped during
filter flushing.
• During Cooling Process – Define whether irrigation should be stopped
during cooling.
• During Misting Process – Define whether irrigation should be stopped
during misting.
• STOP DOSING
• During Filter Flushing – Define whether dosing should be stopped during
filter flushing.
• VALVE
• Delay Between Valves – Define the required delay between closing a valve
until opening the next one. If you wish to open and close the valves
simultaneously set to zero.
• MAIN SCREEN
• Default Hotkey Number – Define the required default hotkey number.
• HISTORY
• History Resolution - Set the history collection rate of the sensors.
• COMMUNICATION
• Controller Number - Select the controller number for communication. The
controller number in the controller and in the PC should match for the
communication to work.
• Baud Rate - Select the baud rate for communication. The Baud rate in the
controller and in the PC must match for communication to work properly.
54
To Next Page
Loading...
Need help?
General
