Netafim NMC-64 - Page 24

NMC-64 Irrigation
• Set water quantity is 3.5 (m
3
/h or 1000 gallons).
The actual meaning of this setting is that 5.0 (liters or gallons) of fertilizer
will be mixed with each cubic meter (1000 gallons respectively) of water
passing through the system.
The total quantity of fertilizer that will be given is 5.0 * 3.5 = 17.5 liters
(Gallons).
2. P.Time (hh:mm) - Proportional time. Each dosing channel is independently
given the time to fertilize. The NMC-64 divides this time equally within the given
irrigation time (quantity) set in
1.2 WATER RUN TIME.
• For example:
• Dosing channel -1- is set to 00:10, dosing channel -2- is set to 01:00.
• Set irrigation time is 03:00 hours.
The NMC-64 will proportionally divide the set fertigation time for each
dosing channel across the set irrigation time (quantity).
Dosing channel -1- will be on for a few pulses, their total time will be 10 min.
Dosing channel -2- will be on for a few pulses (not necessarily the same
amount), their total time will be 30 min.
3. Time. (hh:mm) - Each dosing channel is given the time to fertilize. The dosing
will be done in one bulk that will start after the water before time (quantity) set
in
1.3 DOSING program.
4. Qty. (Liters or Gallons) - Quantity. Each dosing channel is given the amount
to be injected. The dosing will be done in one bulk that will start after the water
before time (quantity) set in
1.3 DOSING program.
To choose a method, place the cursor on the METHOD column, press Enter, a small
window will appear:
P.QTY (1/1000)
P. TIME (hh:mm)
TIME (hh:mm)
QTY. (Liter)
Select the method with the arrow keys and press ENTER to confirm.
• EC - Enter the target EC value.
• pH – Enter the target pH value
24