NetApp EF Series - Page 22

22
Introduction to NetApp EF570 All-Flash Arrays:
Feature Overview with SANtricity 11.50.2
© 2019 NetApp, Inc. All Rights Reserved.
Task
EF560
EF570 and EF280
AutoSupport and Legacy Support Bundle Collection
Enable or disable AutoSupport,
AutoSupport OnDemand, and
AutoSupport remote diagnostics
features
• EMW
• SMcli
• System Manager
• SANtricity Unified Manager
• SANtricity Web Services (REST)
Show AutoSupport logs for all
arrays or a select storage array
• EMW
• SMcli
• System Manager
• REST
Enable or disable legacy support
bundle collection for a select
storage array
• EMW
• SMcli
N/A
Specify the support bundle
collection schedule
• EMW
• SMcli
N/A
Configuration and Status
Display information (other than
alert settings) about configured
arrays
• AMW
• SMcli
• REST (requires SANtricity Web
Services Proxy)
• System Manager
• SMcli (both legacy and secure)
• REST
Show the IP address of each array
• AMW
• SMcli
• REST (requires Web Services
Proxy)
• SANtricity Unified Manager
• System Manager
• SMcli (both legacy and secure)
•
Show the WWN of each array
• AMW
• SMcli
• REST (requires Web Services
Proxy)
• System Manager
• SMcli (both legacy and secure)
• REST
Show the status of each array
• EMW/AMW
• SMcli
• REST (requires Web Services
Proxy)
• SANtricity Unified Manager
• System Manager
• SMcli (both legacy and secure)
• Secure CLI
• EMW
Set up remote volume mirroring
groups and pairs
• EMW/AMW
• SMcli
• EMW script editor CLI
• REST (requires Web Services
Proxy)
• System Manager
• Unified Manager and System
Manager
• EMW
• SMcli (both legacy and secure)
Show array-level configuration,
provisioning, and tuning
• AMW
• SMcli
• EMW script editor CLI
• REST (requires Web Services
Proxy)
• System Manager
• REST