IPv4 Firewall Protection
118
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 55.
2. Enter the settings as explained in Table 27 on page 110.
3. Click Apply
to save your changes. The new rule is now added to the Outbound Services
table.
LAN WAN Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the Internet to the LAN) is
blocked. Remember that allowing inbound services opens potential security holes in your
firewall. Enable only those ports that are necessary for your network.
To create a new inbound LAN WAN service rule:
1. In the L
AN WAN Rules screen, click the Add table button under the Inbound Services
table. The Add LAN WAN Inbound Service screen displays:
To Next Page
Loading...
