Virtual Private Networking Using IPv4 IPSec and L2TP Connections
208
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 119.
3. Change the name of the authentication phase (the default is Gateway):
a. R
ight-click the authentication phase name.
b. Select Rename.
c. Ty
pe GW_ModeConfig.
d. Click anywhere in the tree
list pane.
Note: This is the name for the authentication phase that is used only for the
VPN clien
t, not during IKE negotiation. You can view and change this name in
the tree list pane. This name needs to be a unique name.
The Authentication pane displays in the Con
figuration Panel screen, with the
Authentication tab selected by default.
Figure 120.
To Next Page
Loading...
