NETGEAR FVS318N

Virtual Private Networking Using IPv4 SSL Connections
238
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
.
Figure 139.
3. Complete the settings as explained in the following table:
Table 61. Add SSL VPN Policy screen settings
Setting Description
Policy For
Select one of the following radio buttons to s
pecify the type of SSL VPN policy:
• Gl
obal. The new policy is global and includes all groups and users.
• Gro
up. The new policy needs to be limited to a single group. From the drop-down list, select a group
name. For information about how to create groups, see Configure Groups o
n page 251.
• Us
er. The new policy needs to be limited to a single user. From the drop-down list, select a user name.
For information about how to create user accounts, see Configure User Accounts on p
age 254.
Add SSL VPN Policies
Apply
Policy to?
Select one of the following radio buttons to specify
how the policy is applied. When you select
a radio button, the fields and drop-down lists that apply to your selection (see explanations
later in this table) unmask onscreen.
• Ne
twork Resource. The policy is applied to a network resource that you have defined on
the Resources screen (see Use Network Resource Objects to Simplify Policies on
page 233).
• IP Ad
dress. The policy is applied to a single IP address.
• IP Netw
ork. The policy is applied to a network address.
• A
ll Addresses. The policy is applied to all addresses.