EasyManua.ls Logo

NETGEAR FVS318N

NETGEAR FVS318N
359 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Virtual Private Networking Using IPv4 SSL Connections
239
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Apply
Policy to?
(continued)
Network
Resource
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
Defined
Resources
From the drop-down list, select a network resource that you
h
ave defined on the Resources screen (see Use Network
Resource Objects to Simplify Policies on page 233).
Permission From the drop-down list, select Permit or Deny to
specify
whether the policy permits or denies access.
IP Address Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
IP Address The IP address to which the SSL VPN policy is applied.
Port Range /
Por
t Number
A port (fill in the Begin field) or a range of ports (fill in the Begin
and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank
to apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN po
licy is applied:
VPN T
unnel. The policy is applied only to a VPN tunnel.
Port Fo
rwarding. The policy is applied only to port
forwarding.
All. T
he policy is applied both to a VPN tunnel and to port
forwarding.
Permission From the drop-down list, select Permit or Deny to
specify
whether the policy permits or denies access.
IP Network Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
IP Address The network IP address to which the SSL VPN policy is
a
pplied.
Subnet Mask The network subnet mask to which the SSL VPN policy is
a
pplied.
Port Range /
Port Number
A port (fill in the Begin field) or a range of ports (fill in the Begin
and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank
to apply the policy to all traffic.
Table 61. Add SSL VPN Policy screen settings (continued)
Setting Description

Table of Contents

Other manuals for NETGEAR FVS318N

Related product manuals