NETGEAR FVS318N

Manage Users, Authentication, and VPN Certificates
258
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3. Make the following optional selections:
• T
o prohibit the user from logging in to the wireless VPN firewall, select the Disable
Login check box.
• T
o prohibit the user from logging in from the WAN interface, select the Deny Login
from WAN Interface check box. In this case, the user can log in only from the LAN
interface.
Note: For security reasons, the Deny Login from WAN Interface check box
is selected by default for guests and administrators. The Disable
Login check box is disabled (masked out) for administrators.
4. Click Apply to save your settings.
Configure Login Restrictions Based on IP Address
 To restrict logging in based on IP address:
1. Select Users > Users. The
Users screen displays (see Figure 149 on page 255).
2. In
the Action column of the List of Users table, click the Policies table button for the user for
which you want to set login policies. The policies submenu tabs display, with the Login
Policies screen in view.
3. Click the By So
urce IP Address submenu tab. The By Source IP Address screen displays.
(The following figure shows an IP address in the Defined Addresses table as an example.)
Figure 152.