NETGEAR FVS318N

Monitor System Access and Performance
302
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Router Statistics Screen
 To view the Router Statistics screen:
1. Select Mon
itoring > Router Status. The Router Status screen displays (see the
previous figure).
2. Click the Show S
tatistics option arrow in the upper right of the Router Status screen. The
Router Statistics screen displays:
LAN IPv4/IPv6 Information
MAC Address The MAC address of the wireless VPN firewall.
IPv6 Address The IPv6 address that is assigned to the wireless VPN firewall. For information
abou
t configuring the IPv6 address, see Configure the IPv6 Internet
Connection on page 32.
DHCP Server The status of the IPv4 DHCP server (Enabled or Disabled). For information
abou
t configuring the IPv4 DHCP server, see Configure a VLAN Profile on
page 51.
DHCP Relay The status of the IPv4 DHCP relay (Enabled or Disabled). For information
abou
t configuring the IPv4 DHCP relay, see Configure a VLAN Profile on
page 51.
DHCPv6 Server The status of the DHCPv6 server (Enabled or Disabled). For information about
co
nfiguring the DHCPv6 server, see Configure IPv6 LAN Settings on page 64.
Wireless Information
Wireless Status The status of the wireless access point (Enabled or Disabled).
WAN Information
WAN (IPv4) The screen shows the IPv4 address, subnet mask,
gateway, and status of the
port (UP or Down). For more detailed information, see Table 77 on
page 305.
WAN (IPv6) The screen shows the IPv6 address, gateway, and status of the port (UP or
Down). For more detailed information, see Table 77 on page 305.
Table 75. Router Status screen information (continued)
Item Description