NETGEAR FVS318N

Monitor System Access and Performance
303
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 172.
The following table explains the fields of the Router Statistics screen.
To change the poll interval period, enter a new value
(in seconds) in the Poll Interval field,
and then click Set interval. To stop polling, click Stop.
Detailed Status Screen
To view the Detailed Status screen, select Monitoring > System Status > Detailed Status.
The Detailed Status screen displays:
Table 76. Router Statistics screen information
Item Description
System up Time. The period since the last time that the wireless VPN firewall was started up.
Router Statistics
For the broadband (WAN) interface and for all LAN i
nterfaces combined, the following statistics are
displayed:
Tx Pkts The number of packets transmitted on the port in bytes.
Rx Pxts The number of packets received on the port in bytes.
Collisions The number of signal collisions that have occurred on the port. A collision occurs
when
the port attempts to send data at the same time as a port on the other router or
computer that is connected to this port.
Tx B/s The number of bytes transmitted per second on the port.
Rx B/s The number of bytes received per second on the port.
Up Time The period that the port has been active since it was restarted.