GS716Tv2 and GS724Tv3 Software Administration Manual
5-52 Managing Device Security
v1.0, July 2009
Figure 5-32
Table 5-36. IP ACL Rule Configuration Fields
Field Description
ACL ID Identifies the ACL to which the rule is being added.
Rule ID Enter a whole number in the range 1–10 that will be used to identify the
rule. After you click Apply, the new ID is created and you can configure
the rule settings. You can create up to 10 rules for each IP ACL.
Action Selects the ACL forwarding action that should be taken if a packet
matches the rule’s criteria. Possible values are:
• Permit — Forwards packets which meet the ACL criteria.
• Deny — Drops packets which meet the ACL criteria.
Egress Queue Specifies the hardware egress queue identifier used to handle all
packets matching this IP ACL rule. Valid range of Queue IDs is 0–3.
This field is visible when 'Permit' is chosen as 'Action'.
Match Every Requires a packet to match the criteria of this ACL. Match Every is
exclusive to the other filtering rules, so if Match Every is True, the other
rules on the screen do not appear.
Protocol Type Requires a packet’s protocol to match the protocol listed here. Select a
type from the drop down menu or enter the protocol number in the
available field.
To Next Page
Loading...
