4.14 Initializing of All Settings
4-58 ZM2376
Initializing the operation mode
ZM2376 provides more than one operation mode.
The operation mode cannot be initialized by the above two initializing operations.
To initialize the operation mode, set the operation mode to the default value. Set the operation mode
in the following orders.
_SHIFT_
+ [SYSTEM] key operation → Displays the system setting menu
_-_ _2_ _3_ _0_ _0_ → Displays the operation mode setting menu
_0_ key → Selects the Mode 0 (Default value)
If the operation mode is set, same initial state as when fully initialization is executed in that mode is
established. Initial setting may differ in each operation mode.
For details • • • "4.18 Switching the Operation Mode (alternative command)"
Completely restoring to the setting before shipment
To completely restore the factory default settings, set the operation mode to Mode 0 (default value).
Operation method • • • “Initializing the operation mode” above
To Next Page
Loading...
