7.1 Specification
7-2 ZM2376
7.1 Specification
Measurement parameters
• Primary parameters |Z|, |Y|, L, C, R, G
For equivalent circuit of L, C, and R, Parallel / Series / Auto Selection are
selectable.
• Secondary parameters Q, D, , X, B, Rs, Rp, G, Lp, Rdc (direct-current resistance)
• Auto parameter Primary parameters (including equivalent circuit) and secondary parameters
selection can be selected automatically.
Measured value display range
• |Z| 0.000m to 999.999M
• R (Rs, Rp, Rdc), X 0 , ±(0.001m to 999.999M)
• |Y| 0.00nS to 9.99999kS
• G, B 0 S, ±(0.01nS to 9.99999kS)
• C (Cp, Cs) 0 F, ±(0.00001pF to 99.9999kF)
• L (Ls, Lp) 0 H, ±(0.00001nH to 9.99999GH)
• Q, D 0, ±(0.00001 to 99999.9)
• ±180.000
°
Actual measurement and display ranges of respective parameters are
restricted by the measurement range or frequency.
To Next Page
