2.1 Checking Before Use
2-4 ZM2376
Signal cables
Since the signal cables are not supplied, please purchase commercially available cables. The cable
specifications are as follows.
•DUT connecting cable
Coaxial cable having BNC connector
To correct the cable length exactly, use a coaxial cable (capacitance about 105pF/m) of
characteristic impedance 50Ω.
•GPIB cable
Cable that conforms to the IEEE488.1 Standard.
•USB cable
Cable that conforms to the USB1.1 or USB2.0 Standard.
•RS-232 cable
Interlink cable with D-Sub 9 pins, female-female, inch screws, and shield.
The controllers other than general personal computers have different connector or signal
layout and may require a dedicated cable.
•LAN cable
CAT5 or higher (CAT3 or higher for 10BASE-T). Use a straight cable when connecting to a
hub or router which does not have the automatic cable recognition function, or use a cross
cable when connecting to a peer PC.
To Next Page
Loading...
