3.5 Basic Operations
3-21 ZM2376
Operation of setting menu
Depending on the key operations, the setting menu will be displayed to select a function or set a
numeric value.
Function selection: When options are displayed on the lower line of the setting menu, an option can
be selected by pressing a numeric key associated with each option.
Options that cannot be accommodated in one line are displayed over multiple
pages. The pages can be switched with _BS_ | [PREV] key and _EXP_ |
[NEXT] key.
Even an option that exists on the page not displayed, it can be selected with the
associated numeric key.
Parameter name and current settings
Parameter_name: Value1 (Value2)
0)alt1 1)alt2 2)alt3 Comments >NEXT
Options
Numeric value input: When the cursor is located at the parameter to which a numeric value can be
entered, the comments such as a range of settable values are displayed on the
lower line of the setting menu. The cursor is displayed by blinking the digit.
The following key operations are possible.
• Numeric keys, decimal point key, sign key : Input a numeric value.
• _EXP_ + [_x_]: Input the exponential part (x = p, n, µ, m, k, M) of a
numeric value (to enter the value (_ENTR_
need not
be pressed).
For details Input of exponential part
(Mentioned later)
• _ENTR_
key: Enters the input value.
• _BS_
key: Clears a value being input,
one character at a time from the last.
• _SHIFT_ + [CE]: Clear a value being input, all at once.
Upon clear of a value being input, the currently set value is displayed.
For the menu that needs multiple parameters, the parameters to be set can be
switched with _BS_ | [PREV] key and _EXP_ | [NEXT] key.
Parameter name and current settings
Parameter_name: Value1 (Value2)
Range of value Comments
Available ranges
Indicates that more options
exist on another page
To Next Page
Loading...
