3.5 Basic Operations
3-36 ZM2376
Table 3-2 Measurement range list 2/4 (Rd-min = 100Ω)
Same as above
(Measured in the 10Ω
range)
Same as above
(Measured in the 10Ω
range)
These ranges are unavailable.
Table 3-2 Measurement range list 3/4 (Rd-min = 25Ω-100)
*1 Signal level ≤ 1.2V
( When CV is enabled,
≤ 1.05V )
CC is disabled
Secondary parameter ≠ Rdc
*1 If the restriction conditions are not met, the operation is the same as when Rd-min = 25Ω-1.
Table 3-2 Measurement range list 4/4 (Rd-min = 6Ω-100-f1k)
*2 Frequency ≤ 1kHz
Signal level ≤ 1.2V
(when CV is enabled,
≤ 1.05V
when CC is enabled,
≥ 40mA )
Secondary parameter ≠ Rdc
*2 If the restriction conditions are not met, the operation is the same as when Rd-min = 25Ω-1.
To Next Page
Loading...
