NIRStar 14.1 - User Manual
Page 105 of 124
19 Hyperscanning
19.1 Setting up Hyperscanning
NIRStar offers a Hyperscanning mode to study functional neurovascular activation on two people
simultaneously (see Figure 82).
The Hyperscanning mode is accessible in Channel Setup tab of the Hardware Configuration GUI, provided
that valid numbers of sources and detectors are available. Hyperscanning mode requires that no
detector bundle (four channels) or Source bundle (eight sources) be split between subjects. Therefore,
Figure 82. Hyperscanning example
Figure 83. Confirmation dialog box: Perform Hyperscanning activated
To Next Page
Loading...
Need help?
General
