MPLS Guide MPLS and RSVP-TE
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
125
3.16 Configuration Notes
Network and system interfaces must be configured in the config>router>interface
context before they can be specified in MPLS. Refer to the 7705 SAR Router
Configuration Guide for interface configuration information.
This section describes MPLS and RSVP-TE guidelines and caveats.
• Interfaces must already be configured in the config>router>interface context
before they can be specified in MPLS and RSVP.
• A router interface must be specified in the config>router>mpls context in order
to apply it or modify parameters in the config>router>rsvp context.
• A system interface must be configured and specified in the config>router>mpls
context.
• Paths must be created before they can be applied to an LSP.
• CSPF must be enabled in order for administrative groups and SRLGs to be
relevant.
To Next Page
Loading...
Need help?
General
