Nokia 7705 SAR-W Series - Specifying Peer Parameters

MPLS Guide Label Distribution Protocol
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
437
hello 15 3
keepalive 30 3
no shutdown
exit
exit
targeted-session
hello 5000 255
keepalive 5000 255
peer 10.10.10.104
hello 2500 100
keepalive 15 3
local-lsr-id “to-104”
exit
exit
----------------------------------------------
5.10.6 Specifying Peer Parameters
Use the following CLI syntax to specify LDP peer parameters:
CLI Syntax: config>router# ldp
peer-parameters
peer ip-address
auth-keychain name
authentication-key {authentication-key | hash-
key} [hash | hash2]
Example: config>router# ldp
config>router>ldp# peer-parameters
config>router>ldp>peer-params# peer 10.10.10.104
config>router>ldp>peer-params>peer$ authentication-key
testuser
config>router>ldp>peer-params>peer$ exit
The following example displays the LDP peer parameters configuration output.
ALU-1>config>router>ldp# info
----------------------------------------------
import "LDP-import"
graceful-restart
exit
import "LDP-import"
peer-parameters
peer 10.10.10.104
authentication-key "nGjXyHQtCgHxbBm.kDeYdzSmPZy9KK03" hash2
exit
exit
interface-parameters
interface "test"
exit
interface "to-104"