MPLS Guide MPLS and RSVP-TE
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
253
Table 17 Router MPLS LSP Template Field Descriptions
Label Description
Type The type of LSP
Admin State Down — the path is administratively disabled
Up — the path is administratively enabled
From The IP address of the ingress router for the LSP
Default Path The value used to order the hops in a path
Adaptive Indicates whether the adaptive option is enabled or disabled
Bandwidth n/a
Hop Limit The maximum number of hops that an LSP can traverse,
including the ingress and egress routers
CSPF Indicates whether the CSPF option is enabled or disabled
(always enabled for LSP templates)
Use TE metric Indicates whether the TE metric option is enabled or disabled
Propagate Admin Grp Indicates whether the propagate admin group option is enabled
or disabled
Include Groups The admin groups that are to be included by an LSP when
signaling a path
Exclude Groups The admin groups that are to be excluded by an LSP when
signaling a path
FastReroute Indicates whether the Fast Reroute option is enabled or
disabled
FR Method The type of Fast Reroute (FRR) that is used by the path (always
Facility for LSP templates)
FR Hop Limit The total number of hops a protection LSP can take before
merging back onto the main LSP path
FR Prop Admin
Group
Indicates whether the FRR propagate admin group option is
enabled or disabled
FR Node Protect Indicates whether FRR has node protection enabled or
disabled
Record Route Indicates whether the route is being recorded
Record Label Indicates whether the label is being recorded
Retry Limit The maximum number of retries allowed
To Next Page
Loading...
