Label Distribution Protocol
538
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
5.12.2.3 Clear Commands
fec-egress-statistics
Syntax fec-egress-statistics [ip-prefix/mask]
Context clear>router>ldp
Description This command clears LDP FEC statistics.
Parameters ip-prefix[/mask] — the IP prefix and prefix length associated with the prefix FEC
Values
instance
Syntax instance
Context clear>router>ldp
Description This command resets the LDP instance.
interface
Syntax interface ip-int-name [statistics]
Context clear>router>ldp
Description This command restarts or clears statistics for LDP interfaces.
Note: When LDP FEC statistics are cleared, the current aggregate statistics count is
recorded as a baseline and is used to provide a relative count each time the statistics are
viewed with the show command. Because this baseline number is not reconciled between
the active and inactive CSMs, after a CSM activity switch the statistics on the newly active
CSM will show the aggregate count as though no clear command has been executed.
ipv4-prefix: a.b.c.d
ipv4-prefix-length: 32
ipv6-prefix: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0 to FFFF]H
d - [0 to 255]D
ipv6-prefix-length: 128
To Next Page
Loading...
Need help?
General
