Label Distribution Protocol
482
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
5.12.2.2 Show Commands
• Show Router LDP Commands
• Show Router LDP Bindings Commands
5.12.2.2.1 Show Router LDP Commands
discovery
Syntax discovery [state state] [detail | summary] [adjacency-type type] [session ip-addr[label-
space]]
discovery [state state] [detail | summary] [adjacency-type type] [family]
discovery interface [ip-int-name] [state state] [detail | summary] [session ip-addr[label-
space]] [family]
discovery peer [ip-address] [state state] [detail | summary] [session ip-addr[label-space]]
Context show>router>ldp
Description This command displays the status of the interfaces participating in LDP discovery.
Parameters state — specifies the current operational state of the adjacency
Values established, trying, down
detail — displays detailed information
summary — displays summary information
type — specifies the adjacency type
Values link, targeted
ip-addr — the IP address of the session
label-space — specifies the label space identifier that the router is advertising on the
interface
Values 0 to 65535
family — displays either IPv4 or IPv6 LDP session information
ip-int-name — specifies an existing interface. If the string contains special characters (#,
$, spaces, etc.), the entire string must be enclosed within double quotes.
ip-address — specifies the IP address of the peer
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.
To Next Page
Loading...
