MPLS Guide PCEP
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
359
4.9.2.2 Show Commands
detail
Syntax detail
Context show>router>pcep>pcc
Description This command displays PCEP PCC detailed information.
Output The following output is an example of PCEP PCC detailed information, and Table 36
describes the fields.
Output Example
*A:Sar18 Dut-B>show>router>pcep# pcc detail
===============================================================================
Path Computation Element Protocol (PCEP) Path Computation Client (PCC) Info
===============================================================================
Admin Status : Down Oper Status : Down
Unknown Msg Limit : 10 msg/min
Keepalive Interval : 50 seconds DeadTimer Interval : 150 seconds
Capabilities List : stateful-delegate stateful-pce rsvp-path
Address : 10.10.10.10
Report Path Constraints: True
Open Wait Timer : 60 seconds Keep Wait Timer : 60 seconds
Sync Timer : 60 seconds Request Timer : 120 seconds
Connection Timer : 60 seconds Allow Negotiations : False
Max Sessions : 1 Max Unknown Req : 1000
===============================================================================
*A:Sar18 Dut-B>show>router>pcep#
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.
Table 36 PCEP PCC Field Descriptions
Label Description
Admin Status The administrative status of the PCC
Oper Status The operational status of the PCC
Unknown Msg Limit The maximum rate of unknown messages that can be
received on a PCEP session
Keepalive Interval The specified keepalive interval for the PCEP session
DeadTimer Interval The specified dead time interval for the PCEP session
To Next Page
Loading...
Need help?
General
