MPLS Guide MPLS and RSVP-TE
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
273
summary
Syntax summary
Context show>router>mpls-labels
Description This command displays a summary of MPLS label usage.
Output The following output is an example of MPLS label summary information, and Table 24
describes the fields.
Output Example
*A:Sar18 Dut-B>show>router>mpls-labels># summary
===============================================================================
Mpls-Labels Summary
===============================================================================
Static Label Range : 18400
Bgp Labels Hold Timer : 0
Segment Routing Start Label : 0
Segment Routing End Label : 0
===============================================================================
Table 23 Router MPLS-Labels Label Range Field Descriptions
Label Description
Label Type Displays information about static-lsp, static-svc, and dynamic
label types
Start Label The label value assigned at the ingress router
End Label The label value assigned for the egress router
Aging The number of labels released from a service that are
transitioning back to the label pool. Labels are aged for 15
seconds.
Available The number of label values available in the label range
Total The total number of label values in the label range
Table 24 Router MPLS-Labels Summary Field Descriptions
Label Description
Static Label Range The number of label values available in the static label range
Bgp Labels Hold Timer The number of BGP labels in use under control of the hold
timer
To Next Page
Loading...
Need help?
General
