PCEP
362
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
peer
Syntax peer [ip-address] [detail]
Context show>router>pcep>pcc
Description This command displays PCEP PCC peer information.
Parameters ip-address — specifies a peer IPv4 address to display
Values a.b.c.d
detail — displays detailed peer information
Output The following output is an example of a PCEP PCC peer information, and Table 37 describes
the fields.
Output Example
*A:Sar18 Dut-B>show>router>pcep>pcc# peer detail
===============================================================================
PCEP Path Computation Client (PCC) Peer Info
===============================================================================
IP Address : 10.10.10.11
Admin Status : Down Oper Status : Down
Peer Capabilities : (Not Specified)
Speaker ID : (Undefined)
Sync State : not-initialized Peer Overloaded : False
Session Establish Time: 0d 00:00:00
Oper Keepalive : N/A Oper DeadTimer : N/A
Session Setup Count : 0 Session Setup Fail Count: 0
-------------------------------------------------------------------------------
Statistics Information
-------------------------------------------------------------------------------
Sent Received
-------------------------------------------------------------------------------
PC Request Message 0 0
PC Reply Message 0 0
PC Error Message 0 0
PC Notification Message 0 0
PC Keepalive Message 0 0
PC Update Message 0 0
PC Report Message 0 0
Path Report 0 0
Path Request 0 0
-------------------------------------------------------------------------------
===============================================================================
*A:Sar18 Dut-B>show>router>pcep>pcc#
Table 37 PCEP PCC Peer Field Descriptions
Label Description
IP Address The IP address of the PCC peer