MPLS and RSVP-TE
146
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
3.22 RSVP-TE Configuration Management Tasks
This section discusses the following RSVP-TE configuration management tasks:
• Modifying RSVP-TE Parameters
• Modifying RSVP-TE Message Pacing Parameters
• Deleting an Interface from RSVP-TE
3.22.1 Modifying RSVP-TE Parameters
Only interfaces configured in the MPLS context can be modified in the rsvp context.
The no rsvp command deletes this RSVP-TE protocol instance and removes all
configuration parameters for this RSVP-TE instance. The shutdown command
suspends the execution and maintains the existing configuration.
The following example displays a modified RSVP-TE configuration output.
A:ALU-1>config>router>rsvp# info
----------------------------------------------
keep-multiplier 5
refresh-time 60
msg-pacing
period 400
max-burst 400
exit
rapid-retransmit-time 5
rapid-retry-limit 3
refresh-reduction-over-bypass disable
no graceful-shutdown
no entropy-label-capability
no implicit-null-label
node-id-in-rro exclude
interface "system"
exit
interface "test1"
hello-interval 5000
exit
no shutdown
----------------------------------------------
A:ALU-1>config>router>rsvp#
To Next Page
Loading...
