MPLS Guide MPLS and RSVP-TE
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
267
Output Example - static-lsp transit
A:ALU-12# show router mpls static-lsp transit
===============================================================================
MPLS Static LSPs (Transit)
===============================================================================
In Label In I/F Out Label Out I/F Next Hop Adm Opr
-------------------------------------------------------------------------------
1020 1/1/1 1021 1/1/5 10.10.10.6 Up Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
Output Example - static-lsp terminate
*A:ALU-12>show>router>mpls# static-lsp terminate
===============================================================================
MPLS Static LSPs (Terminate)
===============================================================================
In Label In Port Out Label Out Port Next Hop Adm Opr
-------------------------------------------------------------------------------
131 1/3/1 n/a n/a n/a Up Down
121 1/2/1 n/a n/a n/a Up Down
35 1/3/1 n/a n/a n/a Up Down
-------------------------------------------------------------------------------
LSPs : 3
===============================================================================
Output Example - static-lsp count
*A:ALU-12>show>router>mpls# static-lsp count
===========================================================
MPLS Static-LSP Count
===========================================================
Originate Transit Terminate
-----------------------------------------------------------
000
===========================================================
*A:ALU-12>show>router>mpls# static-lsp
Table 20 Router MPLS Static LSP Field Descriptions
Label Description
Lsp Name The name of the LSP used in the path
To The system IP address of the egress router for the LSP
Next Hop The system IP address of the next hop in the LSP path
Out Label The egress label
Adm Down — indicates that the path is administratively disabled
Up — indicates that the path is administratively enabled