MPLS and RSVP-TE
212
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
standby
Syntax [no] standby
Context config>router>mpls>lsp>secondary
Description The secondary path LSP is normally signaled if the primary path LSP fails. The standby
keyword ensures that the standby secondary path LSP is signaled and maintained indefinitely
in a hot-standby state. When the primary path is re-established, the traffic is switched back
to the primary path LSP.
The no form of this command specifies that the secondary LSP is signaled when the primary
path LSP fails.
Default n/a
Note: A priority level can be assigned to standby secondary paths using the path-
preference command.
To Next Page
Loading...
