MPLS and RSVP-TE
246
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
CSPF Queries The number of requests made by the LSP to the TE database
Failure Code The reason code for in-progress MBB failure. A value of none
indicates that no failure has occurred.
Failure Node The IP address of the node in the LSP at which the in-progress
MBB failed. If no failure has occurred, this value is none.
Explicit Hops The hops that have been specified by the user
Actual Hops The hops that the route has taken, either numbered or
unnumbered
Record Label The label recorded at the specified hop
Computed Hops The hops computed and returned from the routing database,
either numbered or unnumbered
LastResignalAttempt The system up time when the last attempt to resignal this LSP
was made
Last Resignal The last time the route was resignaled
Metric The value of the metric
Last MBB The header for the last make-before-break (MBB) information
MBB Type An enumerated integer that specifies the type of make-before-
break (MBB) operation. If none displays, then there is no MBB
in progress or no last MBB.
MBB State The state of the most recent invocation of the make-before-
break functionality
Ended at The system up time when the last MBB ended
Old Metric The cost of the traffic engineered path for the LSP prior to
MBB
In Progress MBB Header for the currently in-progress MBB information
MBB Type An enumerated integer that specifies the type of make-before-
break (MBB) operation. If none displays, then there is no MBB
in progress or no last MBB.
NextRetryIn The amount of time remaining, in seconds, before the next
attempt is made to retry the in-progress MBB
Started At The time the current MBB began
RetryAttempt The number of attempts for the MBB in progress
Table 14 Router MPLS LSP Path Detail Field Descriptions (Continued)
Label Description
To Next Page
Loading...
