Nokia 7705 SAR-W Series

To Next Page

To Previous Page

MPLS Guide MPLS and RSVP-TE

Use subject to Terms available at: www.nokia.com

251

Parameters lsp-type — specifies the type of LSP to display. The only available options are p2p and

p2mp.

active — displays information from all LSPs with statistics collection enabled

template-match — displays information for a one-hop point-to-point, mesh point-to-

point, or point-to-multipoint LSP template

SessionNameString — the name of the session, up to 64 characters long

ip-address — the system IP address of the sender (a.b.c.d)

lsp-name — the name that identifies the LSP

Output The following output is an example of RSVP LSP ingress statistical information.

Output Example

b.show>router>mpls>lsp-ingress-stats 1.2.2.2 lsp lsp_1

========================================================================

MPLS LSPs Ingress Statistics

========================================================================

-------------------------------------------------------------------------------

LSP Name : toNodeA_1

Sender : 10.10.10.29

-------------------------------------------------------------------------------

Collect Stats : Disabled Accting Plcy. : None

Adm State : Up PSB Match : True

FC BE

InProf Pkts : 0 OutProf Pkts : 0