MPLS Guide MPLS and RSVP-TE
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
255
path
Syntax path [path-name] [lsp-binding]
Context show>router>mpls
Description This command displays MPLS paths.
Parameters path-name — the unique name label for the LSP path
lsp-binding — displays binding information
Output The following output is an example of MPLS path information, and Table 18 describes the
fields.
Output Example
A:ALU-12# show router mpls path
===============================================================================
MPLS Path:
===============================================================================
Path Name Adm Hop Index IP Address Strict/Loose
-------------------------------------------------------------------------------
nyc_to_sjc_via_dfw Up 20 192.20.1.4 Strict
30 192.20.1.6 Strict
40 192.20.1.8 Strict
50 192.20.1.10 Strict
nyc_to_sjc_via_den Up 10 192.20.1.5 Strict
20 192.20.1.7 Loose
30 192.20.1.9 Loose
40 192.20.1.11 Loose
50 192.20.1.13 Strict
secondary_path2 Down no hops n/a n/a
-------------------------------------------------------------------------------
Paths : 3
===============================================================================
A:ALU-12#
A:ALU-12# show router mpls path lsp-binding
===============================================================================
MPLS Path:
===============================================================================
Path Name Opr LSP Name Binding
-------------------------------------------------------------------------------
nyc_to_sjc_via_dfw Up NYC_SJC_customer1 Primary
nyc_to_sjc_via_den Up NYC_SJC_customer1 Standby
secondary_path2 Down NYC_SJC_customer1 Seconda*
-------------------------------------------------------------------------------
Paths : 3
===============================================================================
A:ALU-12#
To Next Page
Loading...
Need help?
General
